الرسيفر قاطع إشارة
حل مشكلة لا توجد اشارة-Solve a problem no signal
عندما يكون الرسيفر "قاطع إشارة" (أي لا يوجد إشارة أو لا يستقبل القنوات)، هناك عدّة خطوات لفحص المشكلة وإصلاحها. إليك طريقة تشخيص العطل ومحاولة إصلاحه:
1 تحقّق من التوصيلات
تأكّد من أن كابل الدش (الكوكسيل) موصول بإحكام في مدخل LNB في الرسيفر.
افحص الكابل من البداية للنهاية بحثًا عن أي قطع أو تلف.
2 فحص طبق الدش (الستالايت)
* تأكّد أن الطبق غير متحرّك أو مهتز.
* قد تكون المشكلة من تحرّك الطبق بفعل الرياح أو أحد قام بتحريكه.
3 فحص اللاقط (الـ LNB)
* تأكّد من أن الـ LNB (القطعة الأمامية على الطبق) تعمل.
* جرّب استبدالها إن أمكن.
4 جرّب جهاز رسيفر آخر**
* إذا كنت تمتلك رسيفر آخر، جرّبه على نفس الكابل لتحديد إذا كانت المشكلة من الرسيفر نفسه أو من الطبق أو اللاقط.
5 إعدادات الرسيفر**
* تأكّد من ضبط الترددات بشكل صحيح.
* افتح قائمة الأقمار الصناعية، واذهب إلى إعدادات #LNB:
* تأكّد أن نوع الـ LNB مضبوط على #universal .
* الجهد 13/18V: تأكد أنه مفعل، لأن تعطيله يوقف الإشارة.
6 بحث عن الإشارة يدويًا**
* من إعدادات التردد، جرّب إدخال تردد قوي مثل:
* #نايل_ سات: 11747 V 27500 أو 11411 H 27500
* ثم راقب قوة وجودة الإشارة.
7تحديث الرسيفر**
* في بعض الحالات، قد يحتاج الرسيفر لتحديث برنامج التشغيل (سوفتوير).
8 #أعد ضبط المصنع**
* قم بعمل إعادة ضبط المصنع إذا لم تنجح المحاولات السابقة (لكن احذر، هذا سيحذف جميع القنوات والإعدادات).
* يُفضل الاستعانة بفني ستالايت لتحديد العطل بدقّة باستخدام جهاز قياس الإشارة (Satellite Finder#).
هل تحب أساعدك أكثر إذا عرفت نوع الرسيفر عندك أو القمر اللي تستخدمه؟
When the receiver is a "signal cut" (i.e. there is no sign or not to receive #channels), there are several steps to examine and fix the problem. Here's how to diagnose the holidays and try to fix it:
1 Achieved from the connections
Make sure that the shower cable (coxyle) is tightly connected to the #LNB entrance in the receiver.
Check the cable from the beginning to the end in search of any pieces or damage.
2 Check the shower plate (satellite)
* Ensure that the dish is not moving or shaken.
* The problem may be from moving the dish by doing the wind or someone who moved it.
3 LNB Click (LNB)
* Ensure that the LNB (front piece on the dish) works.
* Try replacing it if possible.
4 Try another receiver **
* If you have another receiver, try it on the same cable to determine if the problem is from the same gray, from the dish or the drop#.
5 Receive settings **
* Make sure to properly adjust the #frequencies.
* Open the satellite menu, and go to LNB Settings:
* Ensure that the LNB type is controlled by universal.
* Fighter 13/18V: Make sure that it is activated, because its disruption stops the signal.
6 manually search for signal **
* From the frequency settings, try to enter a strong #frequency such as:
* Nilesat: 11747 v 27500 or 11411 H 27500
* Then monitor the strength and quality of the sign.
7 Recorder update **
* In some cases, the receiver may need to update the driver (software).
8 Establish the factory **
* The factory reset if the previous attempts do not succeed (but beware, this will delete all channels and settings).
interruption in broadcasting 🔧 if not all methods:
* It is best to use a satellite technician to determine the Satellite Finder.
Do you like to help you more if you know the type of receiver you or the moon you use?
إرسال تعليق